n
Insert the lamp socket into the housing and lock the
pane of the direction indicator in place
Figure 50
Replacing the direction indicator lamp
To change the rear direction indicators and the rear light,
proceed as follows (see Figure 51):
n
Unscrew the pane.
n
Press the lamp in slightly and give it a quarter turn coun-
ter-clockwise, then pull it out.
n
Insert new lamp and give it a quarter turn clockwise.
B600
Downloaded from
www.Manualslib.com
manuals search engine
Figure 51
Rear lamp, pane removed
9.5
Cleaning and Care
NOTICE
Risk of damage to electronics due to water penetra-
tion. In order to avoid malfunctions, the electronic compo-
nents, motor, and batteries must not come into contact
with water when cleaning the power wheelchair.
02/2009
Maintenance and Care
Page 165