Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Requirements For Operation - Otto Bock A200 Gebrauchsanweisung

Vorschau ausblenden Andere Handbücher für A200:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Safety
2.5 Safety Requirements for Operation
WARNING
Risk of accident and injury as a result of incorrect safe-
ty functions. The user is obliged to make sure that the po-
wer wheelchair and its safety functions are in safe and
proper condition every time before using it.
The power wheelchair may only be operated if all safety
functions, e.g. the automatic brakes, are functional. Brake
failure can result in serious accidents with fatal injuries.
WARNING
Risk of accidents and injury due to incorrect configura-
tion settings. Modified parameter settings in the configu-
ration can lead to changes in driving characteristics. In
particular, changes to the speed, acceleration, braking or
joystick settings can lead to unexpected and therefore un-
controllable operating performance with a risk of acci-
dents. Always test the driving characteristics of the power
wheelchair after configuration / programming is complete.
Programming must only be completed by authorised per-
sonnel. Neither Ottobock nor the control unit manufacturer
are liable for damages caused by programming that was
not properly / professionally adapted to the abilities of the
wheelchair user.
82
Ottobock
|
WARNING
Risk of accident and injury if brake function is unavaila-
ble or unlocked. Take into account the missing brake
function during unlocked brake especially when driving on
slopes or inclines.
WARNING
Risk of injury if the power wheelchair tips over during
driving. The has been approved for driving on inclines and
slopes of no more than 7° (12 %). Navigating inclines
above this percentage value is not permitted.
The critical obstacle height of the A200 is 15 mm. It is not
permitted to cross obstacles higher than 15 mm.
Operating the power wheelchair on stairs is not permitted.
WARNING
Risk of accident if the power wheelchair tips over during
driving. Reduce the driving speed when driving downhill (e.g.
set it to speed level 1). When driving on inclines or slopes, it is
not permissible to negotiate obstacles. Avoid getting into and
out of the power wheelchair on inclines and slopes.
Before driving up slopes or over obstacles, a tilted seat
must be lowered to its basic position and the back must
be in the upright position.
A200

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis