Delivery / Preparing The Wheelchair For Use - Otto Bock Motus Bedienungsanleitung

3 Delivery / Preparing the Wheelchair for Use
CAUTION
Risk of pinching� Only grip the components shown when folding or collapsing the wheelchair.
Your wheelchair is usually delivered fully assembled with the backrest folded and with the rear
wheels removed.
A few simple steps are sufficient to prepare it for use:
1. Attach rear wheels. To attach the rear wheel, press the button on the quick-release axle, slide
four fingers between the spokes and press the button of the quick-release axle with your thumb
(fig. 1). Then attach the rear wheels to the fittings and the axles will automatically engage.
2. While standing next to the wheelchair, tip it slightly toward you. Press apart the crossbrace
with flat of the hand (fig. 2). Make sure that the crossbrace has locked in the support brack-
ets (fig. 3).
3. Pull the bib of the back upholstery upwards and attach the bib to the wheelchair's seat up-
holstery (fig. 4).
4. Insert the seat cushion (fig. 5).
5. Finally, fold down the footplates (fig. 6).
1
3
2
4
45