Device Parameters Page; Device Statistics Page; Network Configuration Page - Videotec ULISSE MAXI NETCAM Bedienungsanleitung

10.1.5 Device Parameters Page

From menu entry Device Parameters it is possible to
set the name of the device and view other additional
information.
Fig. 70

10.1.6 Device Statistics page

The Device Statistics menu outlines, for consultation
only, all the statistics collected during device
operation.
Fig. 71
MNVCUPTMAXIR_1625_EN

10.1.7 Network Configuration page

From menu entry Network it is possible to change
the setting of the Pan & Tilt network. It is possible
to decide whether the device requires an address
assigned statically, dynamically with DHCP or self-
generated. The device supports the Internet Protocol
(IP) in version 4.
With self-generated address the device will
automatically assign itself an address in the
range 169.254.0.0/16.
From the same page it is possible to configure 2 DNS
and decide which mechanisms must be enabled
to automatically identify the devices in the local
network.
Fig. 72
37