First Access To The Web; Home Page - Videotec ULISSE MAXI NETCAM Bedienungsanleitung

10.1.2 First access to the web pages
For proper operation, the pan & tilt must be
configured in relation to the installed camera.
The required parameters are:
• The IP protocol used to communicate with the
camera.
• The type of installed lenses (motorized, fixed or
integrated).
• The credentials required to connect to the IP
camera (username and password of the installed
camera).
Fig. 60
The IP camera installed in Pan & Tilt must be
configured to acquire the IP address using
the DHCP.
MNVCUPTMAXIR_1625_EN

10.1.3 Home Page

The product control interface is displayed if login is
successful.
Fig. 61
35