FORNO ELETTRICO PRESTIGE XL Gebrauchsanweisung Seite 91

7. DEMOLITION AND SELLING
In the case that you decide to use never the electric equipment, because obsolete and/or irremediably damaged or worn at the
point to bring the reparation anti economic, it is necessary to proceed to its out of service making it inactive and without
potential dangers.
Its out of service must be entrusted to specialized and equipped personnel.
Before beginning the demolition, signal that there are interventions in progress.
7.1. DEMOLITION
The main sequential phases for the disassembly and the dismantling include (not exhaustive indicative list):
1. the sectioning device of the feeding external energy, must be blocked with a padlock in the zero position
"0". See the chapter 6;
2. disconnect the conductors from all components presented inside the electric panel and from the
components installed on machine board and send them towards corporations or waste separation
societies in the respect of the actual standards;
3. disassembly all components presented inside the electric panel and installed on electric equipment board
and send corporations or waste separation societies in the respect of the actual standards;
4. all metallic or plastic carcasses, the screws and any other steel or plastic part must be sent towards
corporations or waste separation societies in the respect of the actual standards.
All disconnection operations must be performed using adequate tools of adequate sizes (for example cutting or cross
screwdriver, hexagonal keys, allen spanners, etc...), in accordance with the screws to slacken.
At the end of the dismantling activities all identification labels and every other electric equipment document must be
destroyed.
7.2. SELLING
It is the user obligation to know the actual laws about the disposals management in own country and
work so to comply with these legislations.
The evaluation and the management for the biological compatibility of the products used in the electric
equipment are of the user competence and responsibility
The electric equipment can be sold without the necessity to reduce it in minute pieces; it is sufficient to disconnect the main
groups that formed it and put them on the transportation mean prepared to the selling.
The user main obligations are the following:
1. it is obligatory to not sell the RAEE as urban disposals, but it occurs to perform a separated harvest;
2. for the RAEE selling it is possible to redeliver to the distributor the electric equipment during the new one purchase;
3. in alternative for the selling, work in conformance with the actual standards, contacting the waste separation centres
prepared from the local administrations and/or firms specialized in the industrial machines scrapping and/or in the
disposals selling and/or reuse centres, of treatment and of recycling, so that there is the separation between plastic
material, metallic material and electric components that must be sent to the waste separations;
4. in the machine dangerous substances aren't presented that can have a potentially negative effect towards the
environment and the human health;
5. a machine improper use or of its parts doesn't determine a potentially negative effect towards the environment and
the human health;
6. the symbol that shows the waste separation needs (
showed here under; the symbol is printed in visible way, readable and indelible on the product;
7. the sanctions foreseen in case of abusive selling of these refuses, are those ones defined from the actual and applicable
laws where the product is eventually disposed abusively: administrative sanctions application of the RAEE
Manuale Forni definitivo A5.doc
), is a rubbish container on wheels barred as
ORIGINAL INSTRUCTIONS TRANSLATION
Pag. di
45 45