FORNO ELETTRICO PRESTIGE XL Gebrauchsanweisung Seite 87

6.4.3. CLOSURE DOOR GLASS CHANGE
The personnel that perform the operations included in the present chapter, besides to present characteristics
reported in the chapter 4 and must have read and understood the safety prescriptions showed in the chapter 4.
For the worn and changed materials selling, make reference to the prescriptions of the chapter 7.
All cleaning interventions must be put in act only and exclusively after having unloaded the electric
equipment with the food product in working and have insulated it from the electric feeding and external
energy sources and having waited the cooling times to allow the reaching of the electric equipment
environment temperature (see chapter n.4).
The baking room closure door is constituted from a temperate glass and from an adequate insulated steel structure. In
case of glass breaking, for the change, proceed as indicated:
1. after the switching off, wait that the electric equipment reaches the environment temperature (see chapters n. 4 and 5)
2. open manually the baking room closure door
3. slacken the blockage screws (1) with the appropriate tool use placed in the closure door internal part
4. remove manually the internal bodywork (2)
5. remove the mechanical washer (3)
6. remove the broken glass (4) and the possible parts presented in the internal mechanical washer seat (5)
7. place the new tempered glass having sizes and thickness corresponding to those of the removed glass
8. replace the mechanical kasher, the bodywork, etc... proceeding in backward way
6.4.4. RESISTANCES CHANGE
The personnel that perform the operations included in the present chapter, besides to present characteristics
reported in the chapter 4 and must have read and understood the safety prescriptions showed in the chapter 4.
For the worn and changed materials selling, make reference to the prescriptions of the chapter 7.
All cleaning interventions must be put in act only and exclusively after having unloaded the electric
equipment with the food product in working and have insulated it from the electric feeding and external
energy sources and having waited the cooling times to allow the reaching of the electric equipment
environment temperature (see chapter n.4).
The resistances change includes operations particularly delicate that request much experience, so they must
be performed exclusively from the personnel directly employed from the manufacturer, or authorized from him
and however under his responsibility.
For this matter the instructions for the parts / components change aren't included in the present instructions
manual for the use, but it is necessary an intervention request directly to the Authorized Assistance.
Manuale Forni definitivo A5.doc
ORIGINAL INSTRUCTIONS TRANSLATION
Pag. di
41 41