FORNO ELETTRICO PRESTIGE XL Gebrauchsanweisung Seite 89

TYPE
Cooling fan and controls Temperature in the controls panels
panel heat not in function exceeds 60 °C
The chimney is obstructed
Insufficient electric
chimney not sufficiently sized
equipment chimney and
presence of fume in the
environment
Lacks and loading pipes
disconnections
HOW NOTICE IF...
The electric phases aren't
active
Manuale Forni definitivo A5.doc
POTENTIAL CAUSES
Contact the Authorized Assistance Centre.
Keep in efficiency the chimneys through
specialized personnel
Size the chimneys in accordance with the specific
technical standards
The fumes emitted and the leakage must be
conveyed to the opportune chimney flues: keep in
efficiency the hoods through specialized personnel
EVIDENCES
If the feeding is three phase, the electric equipment temperature raising speed fall of
1/3 of the power, for every not active phase behave the loss.
If the feeding is mono phase, the phase fall behaves the electric feeding lacking.
ORIGINAL INSTRUCTIONS TRANSLATION
MODALITY AND CHECKS
Pag. di
43 43