Operation
Figure 7
Release strap for the back rest
6.1.3 Side Panel with Arm Rest
The side panels can be removed by loosening the thumb
screws and lifting the side panels. If the control panel is at-
tached to the arm rest, it must be removed before taking out
the side panel (Section 6.1.4).
The thumb screws are located at the lower end of the arm
rest holders (see Figure 9).
Page 116
Downloaded from
www.Manualslib.com
manuals search engine
Figure 8
Removing the side panel
After remounting the side panel, do not forget to firmly
retighten the thumb screw.
The height of the arm rest can be changed by loosening the
screw (see Figure 9).
Firmly re-tighten the screws after making adjustments.
02/2009
B600