bürkert TopControl Basic 8696 Bedienungsanleitung Seite 31

Type 8696
Controlanddisplayelements
7.6 error messages
7.6.1 error messages in manual and auTOmaTic operating
statuses
Display Cause of fault
LED 1 (red) Checksum error in data memory
on
→ Data memory defective
→ The device automatically switches to an older
(possibly not current) data record.
Table 12: Error messages in the operating statuses
7.6.2 error messages while the X.TUNE function is running
Display Cause of fault
LED 1 (red) No compressed air connected
on
Compressed air failure while the X.TUNE function
was running
Actuator or control system deaeration side leaking
Control system aeration side leaking
Table 13: Error messages for the X.TUNE function
remedial action
Not possible, device defective
remedial action
Connect compressed air
Check compressed air supply
Not possible, device defective
Not possible, device defective
english
31