Display Of The Leds - bürkert TopControl Basic 8696 Bedienungsanleitung

7.5 Display of the leDs
LED 2
LED 1
Figure 15: LED display
LeD 1 (green / red)
LeD States
green
on
flashes slowly
flashing
alternating
flashes quickly
off
flashing
slow
Table 10: Display LED 1
LeD 2 (green / yellow)
LeD States
green
on
off
flashes slowly
off
flashes quickly
off
30 Table 11: Display LED 2
LED 1
(green / red)
LED 2
(green / yellow)
Display
red
off Acceleration phase when Power ON
off Operating status AUTO (AUTOMATIC)
flashing
MANUAL operating status
off X.TUNE function
on ERROR (see chapter "7.6 Error messages")
flashing
AUTO operating status for sensor break detection
Display
yellow
off Actuator closed
on Actuator open
Remaining control deviation
off
(actual value > set-point value)
Remaining control deviation
flashes slowly
(actual value < set-point value)
off Closing in MANUAL operating status
flashes quickly Opening in MANUAL operating status
english
Type 8696
Controlanddisplayelements
Display of
AUTO, MANU, X.TUNE and FAULT
Display of state of actuator
(open, closed, opens or closes)