Werbung
Verfügbare Sprachen
Verfügbare Sprachen
en
86 | MT ZERO 6 Touch | Symbols used
1.2.3
Symbols on the product
Symbols
STOP!
STOP!
M = MT ZERO 6 Touch AWx
1
P = MT ZERO 6 Touch AWxP
2
|
1 695 600 965
2020-02-27
Description
Definition
Direction of wheel
The wheel must turn in the direction of rotation
rotation
indicated (see sec. "Checking the direction of
rotation").
Compressed-air
After the compressed-air supply has been
supply
disconnected, the machine parts under pressure will
move to their resting positions automatically.
Start/stop balancing
Adhesive label on the wheel protection casing.
Indicates the direction for starting and stopping the
rotation of the flange (wheel).
R Indicates the operating voltage.
Intended voltage
R Observe the information on the plate.
supply
R The plate shown above is merely intended as an
example; the voltage listed there depends on the
electrical equipment of the machine.
Releasing the
In case of a faulty compressed-air valve, proceed as
pneumatic flange
specified to remove the wheel.
Using the pedal with
Adhesive label on the body above the pedal.
single function
Indicates the functions depending on how it is used.
R Pedal down:
lock shaft/wheel.
Using the pedal with
Adhesive label on the body above the pedal.
double function
Indicates the functions depending on how it is used.
R Pedal up:
lock/release the pneumatic flange.
R Pedal down:
lock shaft/wheel.
M
P
1
2
X
X
X
X
X
X
X
X
X
X
Beissbarth GmbH
Werbung
