Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. The wheel will automatically position itself in the
first position for attaching a balance weight behind a
spoke at low speed.
As soon as the correct position for attaching
the balance weight has been reached, the refer-
ence mark on the screen will position itself at the
12-o'clock position.
The balance weight to be attached will be indi-
cated in the round section.
i
Some machine versions require the wheel to be
positioned manually according to the instructions
shown on the monitor.
4. Attach the adhesive balance weight of the correct
value using the electronic rim distance gauge.
Attach the balance weight behind the first spoke.
i
For attaching adhesive balance weights using the integrated
laser indicator, see the "Attaching adhesive balance weights
by laser indicator" section. The laser indicator will only be
active if the attachment of the balance weight by electronic
rim distance gauge is deactivated.
i
For attaching adhesive balance weights, see the
"Attaching adhesive balance weights" section.
5. Tap the value of the deactivated balance weight in
the round section.
The value of the balance weight to be attached in the
second position behind the spoke will be activated.
The reference mark for the second position for
attaching the balance weight behind the spoke
will be activated.
The indicator for the first positioning of a balance
weight referring to attaching balance weights be-
hind the spoke will be deactivated.
The value of the balance weight to be attached in the
first position behind the spoke will be deactivated.
Beissbarth GmbH
Wheel balancing | MT ZERO 6 Touch | 125
6. The wheel will automatically position itself in the
second position for attaching a balance weight
behind a spoke at low speed.
As soon as the correct position for attaching
the balance weight has been reached, the refer-
ence mark on the screen will position itself at the
12-o'clock position.
The balance weight to be attached will be indi-
cated in the round section.
i
Some machine versions require the wheel to be
positioned manually according to the instructions
shown on the monitor.
7. Attach the adhesive balance weight of the correct
value using the electronic rim distance gauge.
Attach the balance weight behind the second
spoke.
i
For attaching adhesive balance weights, see the
"Attaching adhesive balance weights" section.
i
For attaching adhesive balance weights using
the integrated laser indicator, see the "Attaching
adhesive balance weights by laser indicator"
section. The laser indicator will only be active if the
attachment of the balance weight by electronic rim
distance gauge is deactivated.
i
To close the "SPLIT" program and return to the
display of just one balance weight, tap the
again.
i
After the balance weights have been attached, the
imbalance must be measured again to check the
balance.
en
key
|
1 695 600 965
2020-02-27
Werbung
