Beissbarth MT ZERO 6 Touch Betriebsanleitung Seite 116

en 116 | MT ZERO 6 Touch | Wheel balancing
i
After a tap on the symbol, the data collection
screen will be displayed and no changes to program
selection will be saved.
8.9 Entering the rim data with detection
of the disabled balancing program
i
To proceed with this special data input procedure,
the function for detecting the balancing program
automatically must be disabled (see sec. "Machine
settings menu").
i
Following deactivation, the data can be acquired
automatically or manually. How the status of the
symbols in the "Machine settings" menu is changed
is shown in the following.
Automatic mode
Green: Automatic acquisition of the dimensions
and the balancing program by the electronic rim-
distance gauge and the sonar probe active.
Red: Automatic selection inactive.
Manual mode
Red: Automatic acquisition inactive.
Red: Automatic selection inactive.
8.9.1 Standard, ALU1 (PAX1), ALU4, ALU5 and all
static balancing programs
Standard
Alu5
E. Sta1 E. Sta2
|
1 695 600 965 2020-02-27
Alu1 Alu4
Pax1
E. Sta3
i
The procedure for entering the wheel data depends
on the balancing program selected.
To balance the wheel, the following parameter values
must be entered for the wheel:
$
Rim distance: This is the wheel distance of the
vehicle.
$
Diameter: This is the nominal diameter indicated
on the rim.
$
Width: For the standard programs, this is the rim
width.
Measuring rim distance and diameter automatically
1. Open the data collection screen from the "Home"
main screen.
Fig. 75: Main screen ("Home")
1 Open the data collection screen
2. Select the balancing program (see sec. "Selecting
the balancing program manually").
i
Follow the instructions on the monitor if applicable.
The software will respond directly to movement
of the electronic rim-distance gauge and provide
immediate feedback to the user.
3. Place the electronic rim-distance gauge for rim
distance and rim diameter against the rim and hold
in position for one second.
i
An audible signal will confirm that the position has
been acquired.
1
Beissbarth GmbH