Beissbarth MT ZERO 6 Touch Betriebsanleitung Seite 137

Fig. 118: Statistical-evaluation screen
Symbols Description
Total number of processes performed since the
function was installed
Number of processes performed since the machine
was switched on
Total amount of balance weight attached in g/oz
since the function was installed
Estimate of the reduction of the total amount of
balance weight attached in g/oz with the OCD
function active in percent
Subset of the total amount of balance weight
attached in g/oz since the machine was switched on
Estimate of the reduction of the subset of the total
amount of balance weight attached with the OSD
function active in percent since the machine was
switched on
Total number of balance weights attached since the
function was installed
Estimate of the reduction of the total number of
balance weights attached with the OSD function
active in percent
Subset of the total number of balance weights
attached since the machine was switched on
Estimate of the reduction of the subset of the total
number of balance weights attached with the OSD
function active in percent since the machine was
switched on
i
To close the menus and return to the operating
screens, tap the
Beissbarth GmbH
symbol on the status bar.
Menu navigation | MT ZERO 6 Touch | 137
11.1.2 Calibration menu
1. Tap the symbol on the first menu level.
 The second level will be called up.
2. Tap the symbol on the second menu level.
 The third level will be called up for selecting the
type of calibration.
Fig. 119: Calibration selection screen
Symbols Description
Calibration using wheel and balance weight.
Flange calibration.
Calibration of the electronic rim distance gauge
and the sonar probe.
3. Select the desired function by tapping the
associated symbol.
 The calibration procedure will be called up di-
rectly.
i
The individual calibration procedures are described
in the "Calibration" section.
i
To close the menus and return to the operating
screens, tap the
en
symbol on the status bar.
|
1 695 600 965 2020-02-27