Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4. To end measurement, simply return the rim-distance
gauge to its resting position.
"
The individual values have now been read in and are
displayed on the data collection screen on the monitor.
Measuring rim distance and diameter manually
1. Open the data collection screen from the "Home"
main screen.
Fig. 76:
Main screen ("Home")
1 Open the data collection screen
2. Select the balancing program (see sec. "Selecting
the balancing program manually").
3. Position the rim-distance gauge on the rim and read
off the value at position "K" on the millimeter scale.
651127-69_Im
k
80
7
0
6
0
50
20
10
100
90
40
30
Fig. 77:
Determining the distance between the rim and the
MT ZERO 6 Touch
4. Tap the numerical value of the
show the numerical evaluation device.
5. Enter the read-off value.
6. Confirm the value entered to return to the data
collection screen.
i
The rim diameter can be determined (read off)
at the rim itself or measured with the measuring
compass.
Beissbarth GmbH
Wheel balancing | MT ZERO 6 Touch | 117
7. Position the measuring compass as shown in the
figure.
1
Fig. 78:
3 Rim diameter scale
4 Outer tip for rim diameter
8. Read off the rim diameter.
9. Tap the numerical value of the
show the numerical evaluation device.
10. Enter the read-off value.
11. Confirm the value entered to return to the data
collection screen.
Measuring rim width automatically
i
The rim width can be measured electronically
by sonar for the standard programs. See section
"Acquiring rim data automatically".
Measuring rim width manually
i
The rim width can be read off the rim or determined
with the measuring compass.
1. Position the measuring compass as shown in the
figure.
1
parameter to
Fig. 79:
1 Rim width scale
2 Inner tip for rim width
Determining rim data with the
2
651076-17_Im
Determining rim data with the measuring compass
1 695 600 965
en
measuring compass
parameter to
|
2020-02-27
Werbung
