Beissbarth MT ZERO 6 Touch Betriebsanleitung Seite 140

en 140 | MT ZERO 6 Touch | Menu navigation
Workshop data menu
1. Tap the symbol on the third menu level.
 The screen for entering the workshop data is dis-
played.
Fig. 123: Workshop data screen
Symbols Description
After a tap on the symbol, the "Home" main screen
will be shown again.
Pressing the symbol confirms and saves the data
entered.
The data appear in this order:
R
Name of the workshop.
R
Address.
R
City.
R
Country.
R
Authorized telephone contact.
2. Click the corresponding fields to display the keypad
and to enter or change data.
i
All fields must be filled out in order to save the data.
Otherwise, a message appears with a request to fill
out all fields.
3. After the data is entered, press the
save the changes.
i
To close the menus and return to the operating
screens, tap the
|
1 695 600 965 2020-02-27
symbol to
symbol on the status bar.
11.2 Changing the user selection
1. Tap the symbol in the status bar.
 The first menu level will be called up.
2. Tap the symbol on the first menu level.
 The second level will be called up for user selec-
tion.
Fig. 124: User selection screen
3. Select a user by tapping the associated symbol.
 The symbol will be activated, and the stop light
will turn green.
i
There are 2 user databases available in the software.
The most recently selected settings and rim data are
assigned to the current user and saved.
i
To close the menus and return to the operating
screens, tap the symbol on the status bar.
Beissbarth GmbH