Beissbarth MT ZERO 6 Touch Betriebsanleitung Seite 135

2. Press the symbol for the wheel on which the
imbalance is being measured.
 The data collected is added to the table.
 The symbol that represents the wheel switches
to gray.
INT
15 g -
EXT
10 g -
Fig. 112: Detail of the screen after the first imbalance
measurement
3. Press the symbol to return to the basic
balancing screen.
4. Perform the necessary steps to reduce the wheel's
imbalance.
i
Continue with data collection only after balancing
of the wheel has been completed, i.e. when
the imbalance is zero after the last imbalance
measurement is started.
5. Press the symbol on the balancing screen.
6. Press the symbol for the wheel on which the
imbalance is being measured.
 The data collected is added to the table.
 The symbol that represents the wheel switches
to red.
INT
15 g 0 g
EXT
10 g 0 g
Fig. 113: Detail of the screen after the first imbalance
measurement
"
Data acquisition for the individual wheel is now
complete.
i
Repeat the process for all of vehicle wheels that
need adjustment.
Beissbarth GmbH
Creating a balancing report | MT ZERO 6 Touch | 135
10.3 Report
1. Press the
to create a report.
 The print preview of the report is displayed.
Wheel Balancing Report
WHEEL BALANCER Sw Version
BEISSBARTH XXX_XX.XX.XXX
WORKSHOP
-
-
- -
-
CUSTOMER VEHICLE
PLATE Km/Miles
USER: 1
MEASURES TYRE
Width: XX inch
Diam: XX inch
Fig. 114: Print preview of report
Symbols Description
After the symbol has been pressed, the data
collection screen will be shown again to create a
report.
Printout of the report starts after the symbol is
pressed.
The content of the report is arranged in this order, from
left to right:
R
Make
R
Software version
R
Workshop data
R
Customer name
R
Vehicle type
R
Vehicle registration number
R
Odometer reading in km/miles
R
Operator of the wheel balancing machine
R
Indication of the balancing program
R
Rim measurements collected by the wheel balancing
machine
R
Tire data
i
To complete the workshop data, see the section
"User-defined settings menu".
2. Press the
report.
symbol on the data collection screen
INT INT
15 g 0 g
EXT EXT
10 g 0 g
INT - - INT
EXT - - EXT
symbol to start printout of the
|
1 695 600 965
en
- -
- -
- -
- -
2020-02-27