Getting Familiar With Your Vehicle; Position Of Serial Number; On - Off Switch - Rotax Rm 1 Benutzerhandbuch

2. GETTING FAMILIAR WITH YOUR VEHICLE

2.1. Position of serial number

Both the vehicle and the engine are identified by a serial
number.
Engine:
The engine is marked with a 6-digit number.
Vehicle:
The vehicle is marked with a 4 (Mod. 2002)- or 5-digit number
(from Mod. 2003 onwards), (see illustration).
At vehicles from model 2003 onward the serial number is
marked on a tag at the rear cross member (without illustration).
Note: Please, always indicate these serial numbers when contacting a ROTAX distribution
partner or a ROTAX Service Center. Having these numbers available facilitates
assistance.
2.2. ON – OFF switch
The ON – OFF switch (pos. 1) can be set in 3 different
positions:
OFF
ON
START
Attention: In "ON" position all electrical consumers are supplied with current. This can, after
some time, cause discharging of the battery, even if the engine is at standstill, and
can at long term damage the battery.
Seite/page 79/132
Operator`s Manual RM1
engine is stopped
ignition switched on, all electrical
systems are operating
start of engine
ROTAX KART RM1 Ausgabe/Edition 05/2003