Rotax RM 1 Benutzerhandbuch Seite 114

KART PART 1
Check brake circuit for non-leakage
Check level of brake-fluid in expansion
chambers refill as required
Check functions of brake system
Check brake pads for wear, renew as
required
Renew brake fluid
Check hydraulic hoses of brake system
for damages and non-leakage
Check brake caliper supports for
damage
Verify a tight fit of all brake-system
fixation elements and retorque as
required
Check steering for easy movability
Check steering for damages
Check steering rods for damages
Verify a tight fit of all steering wheel
fixation elements and retorque as
required
Check tire pressure
Check tires for damages and wear
Check fixation of rims and hubs,
retorque as requested
Check tire safety screws for tight fit,
retorque as requiredd
Check throttle Bowden cable for easy
movability, apply oil as requested
Check shifting Bowden cables for
possible contact with hot parts
(exhaust..)
Check shift paddle for easy movability
Seite/page 114/132
Operator`s Manual RM1
FREQUENCY
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
ROTAX KART RM1
NOTES
Use only brake fluid of DOT 4
quality
X
min. layer thickness:
1,5 mm / 0,06 in
Renew yearly
Use only brake fluid of DOT 4
quality
right after every collision
right after every collision
right after every collision
Ausgabe/Edition 05/2003