Grundfos Control MPC-Serie Installationsanleitung Seite 69

8.7.72 Software status (4.5.9)
Fig. 125Software status
Description
The display shows the status of the software installed in CU 352.
Furthermore, the version code and the product numbers of
configuration files (GSC) read into the unit are shown. You can
also upgrade the software version. Contact Grundfos for further
information.
8.7.73 Status display menu (4.6)
Fig. 126Status display menu
Description
In the main status menu, you can have up to three status values
displayed.
In this menu, you can define each status value to be displayed
and define a short name for the value.
PV = Process Value
SP = Setpoint
Q = Flow
Setting range
Name of each display value.
Function type for Display 1-3.
Fig. 127Status display menu (4.6.1)
Setting in operating panel
• Settings > Status display menu
1. Select display 1, 2 or 3, press [OK].
2. Define a name for display.
3. Select the value for the display 1, 2 or 3.
Factory settings
Display 1: PV, Primary sensor
Display 2: SP, Actual setpoint
69