Ignition Coil; Engine Stop Switch - Yamaha WaveRunner FX160 Wartungshandbuch

– +
ELEC
IGNITION SYSTEM

IGNITION COIL

1. Measure:
• Primary coil resistance
Out of specification → Replace.
Primary coil resistance:
1.19–1.61 Ω at 20 °C (68 °F)
NOTE:
When measuring a resistance of 10 Ω or less
with the digital tester, the correct measurement
cannot be obtained because of the tester's
internal resistance.
Refer to "Low resistance measurement".
2. Measure:
• Secondary coil resistance
Out of specification → Replace.
Secondary coil resistance:
8.5–11.5 kΩ at 20 °C (68 °F)

ENGINE STOP SWITCH

1. Check:
• Engine stop switch continuity
Out of specification → Replace.
Engine stop switch continuity
(black coupler)
Clip Position
Installed
Removed
7-18
Lead color
White
Free
Push
Free
Push
E
Black