Yamaha WaveRunner FX160 Wartungshandbuch Seite 150

INSP
ADJ
3
ELECTRICAL
2
1
3. Inspect:
• Specific gravity
Out of specification → Charge.
Specific gravity at 20 °C (68 °F):
1.28
Charging current:
1.9 amps × 10 hrs
4. Install:
• Filler caps
CAUTION:
Before installation, rinse off any fluid from
the battery box and battery and make sure
that the battery is dry before installing it.
5. Install:
• Battery breather hose 1
• Battery
• Battery positive lead 2
• Battery negative lead 3
• Bands
CAUTION:
• Connect the positive lead to the battery
terminal first.
• Make sure the battery leads are con-
nected properly. Reversing the leads can
seriously damage the electrical system.
• Make sure that the battery breather hose is
properly connected and is not obstructed.
• Coat the terminals with a water resistant
grease to minimize terminal corrosion.
3-26
E