General; Drain Plug Inspection; Lubrication Points - Yamaha WaveRunner FX160 Wartungshandbuch

INSP
ADJ

GENERAL

GENERAL

Drain plug inspection

1. Inspect:
• Drain plugs
Cracks/damage → Replace.
• O-rings
Cracks/wear → Replace.
• Screw threads
Contaminants → Clean.

Lubrication points

1. Lubricate:
• Throttle cable (handlebar end)
Recommended lubricant:
Rust inhibitor
NOTE:
Before lubricating the throttle cable, squeeze
the throttle lever and remove the rubber seal
1.
2. Lubricate:
• Throttle cable (throttle body end)
Recommended lubricant:
Yamaha marine grease,
Yamaha grease A
(Water resistant grease)
3. Lubricate:
• QSTS control cables (handlebar end)
Recommended lubricant:
Yamaha marine grease,
Yamaha grease A
(Water resistant grease)
NOTE:
Before lubricating the QSTS control cables,
remove the QSTS cable housing cover. Spray
the rust inhibitor into the outer cables, and
apply grease to the inner cables.
3-29
E