Service Points; Crankcase Disassembly - Yamaha WaveRunner FX160 Wartungshandbuch

POWR
6
10
2
14
9
13
5
H
F B
8 6 2
9 3 1
C A
I
CRANKCASE
12
8
4
15
11
7
1 3
J
D
4 0
5 7
E
G

SERVICE POINTS

Crankcase disassembly

1. Remove:
• Oil pan bolts
NOTE:
• Loosen each bolt 1/4 of a turn at a time, in
stages and in a crisscross pattern. After all of
the bolts are fully loosened, remove them.
• Loosen the bolts in decreasing numerical
order (refer to the numbers in the illustra-
tion).
• The numbers embossed on the oil pan indi-
cate the oil pan tightening sequence.
2. Remove:
• Crankcase bolts
NOTE:
• Loosen each bolt 1/4 of a turn at a time, in
stages and in a crisscross pattern. After all of
the bolts are fully loosened, remove them.
• Loosen the bolts in decreasing numerical
order (refer to the numbers in the illustra-
tion).
• The numbers embossed on the crankcase
indicate the crankcase tightening sequence.
3. Remove:
• Lower crankcase
CAUTION:
Tap on one side of the crankcase with a
soft-face hammer. Tap only on reinforced
portions of the crankcase, not on he crank-
case mating surfaces. Work slowly and
carefully and make sure the crankcase
halves separate evenly.
M9 × 105 mm bolts: 1– 0
M6 × 55 mm bolts: A– F
M6 × 55 mm bolts: G, H
M6 × 70 mm bolts: I
M6 × 55 mm bolts: J
5-85
E