Yamaha WaveRunner FX160 Wartungshandbuch Seite 728

HULL
HOOD
b
c
d
EXHAUST SYSTEM
a
a
SERVICE POINTS
Exhaust system inspection
1. Inspect:
• Water lock band
Cracks/damage → Replace.
2. Inspect:
• Rubber hoses
Burns/cracks/damage → Replace.
3. Inspect:
• Water lock
Cracks/leaks → Replace.
4. Inspect:
• Water tank
Cracks/damage/leaks → Replace.
Exhaust component parts sub-assembly
1. Install:
• Rubber hose
• Plate
NOTE:
Be sure to fit the projections on the rubber
hose with the grooves in the plate.
2. Install:
• Rubber hoses
• Water tank
NOTE:
• Be sure to insert the rubber hose to the line
a on the water tank.
• Make sure that there is a surface distance of
47 mm (1.9 in) b between the parting lines
of the water tank and rubber hose.
• Align the parting line c of the rubber hose
with the parting line d of the water tank.
8-46
E