Yamaha WaveRunner FX160 Wartungshandbuch Seite 656

HULL
HOOD
QSTS GRIP
SERVICE POINTS
QSTS cable inspection and adjustment
1. Inspect:
• QSTS cables
Frays/kinks/rough movement →
Replace.
2. Adjust:
• QSTS cable length a
QSTS cable length:
72 ± 0.5 mm (2.83 ± 0.02 in)
NOTE:
• Before adjusting the QSTS cables, set the
trim grip to the neutral position.
• Adjust the QSTS cable lengths a to the
specified length and be sure to take up any
slack.
QSTS grip inspection
1. Inspect:
• QSTS grip
Damage/wear → Replace.
8-10
E