Getting Into And Out Of The Wheelchair - Otto Bock skippi Bedienungsanleitung

move the footrest receivers on the seat plate to the desired
position. Afterwards, firmly retighten the screws (Fig. 23).
In transverse direction,
independently from each other (Fig. 24).
Note!
Make sure to firmly retighten all screws and nuts
after making adjustments.

10 Getting Into and Out of the Wheelchair

Thanks to the modular design of the Skippi power wheelchair
for children, it is easy to get into and out of the wheelchair. The
armrests and footrests can be removed easily and thus allow
easy access for transfer from the side or from the front.
telescoping is possible
(Abb) D2_3590
Fig. 23
(Abb) D2_3574
Fig. 24
71