Drive-Away Lock; Figure 18 Information Window With Drive-Away Lock - Otto Bock B600 Bedienungsanleitung

6.3.7 Drive-Away Lock

INFORMATION
The drive-away lock can be activated as described in the
following, only if the "drive-away lock" parameter has been
set to "On". At the factory, the drive-away lock parameter
is set to "Off". It is also possible that the factory setting
has been changed to "On" if requested with the order or
by the specialist dealer.
Please ask your specialist dealer about the setting select-
ed for your wheelchair.
The control unit of the B600 power wheelchair features an
electric drive-away lock to disable the driving function.
Activation via control panel
1. If the control unit is turned on, press and hold the mode
button for at least 5 seconds.
2. A short beep confirms activation of the drive-away lock.
3. The control unit is turned off automatically.
Activation of the drive-away lock is indicated by the key sym-
bol on the display.
B600
Downloaded from www.Manualslib.com manuals search engine
Display symbol(s)
Table 3 Display of the drive-away lock on the control panel
Activation via separate LCD monitor
If a special control is used, the drive-away lock is activated
using the separate LCD monitor. On the LDC monitor, se-
lect the menu item "Drive-away lock" in the menu "Settings".
Activation is confirmed with an acoustic signal and the con-
trol unit is switched off.
Figure 18 Information window with drive-away lock
02/2009
Operation
Information
Drive-away lock
Page 129