Range; Drive-Away Lock - Otto Bock A200 Gebrauchsanweisung

All 10 LED segments are illuminated when the battery is fully
charged. As the remaining battery capacity decreases, the
LED segments turn off one by one (see Table 2).
If the last three segments flash, the battery must be charged
immediately.
The charging process is indicated by LED running light.
When the battery is charging, the driving function is blocked.
Display
Running light
Flashing light
Flashing light
Table 2 Battery indicator on the control panel
A200
Information
Battery is charged
Charge the battery, if possible
Low battery, recharge urgently
Battery charging
Battery undervoltage
Battery overvoltage

6.3.5 Range

INFORMATION
Information about the range of the power wheelchair can
be found in the chapter ‚TechnicalData'.
Please note that the specified range was determined un-
der defined conditions in accord a nce with ISO 7176-4. In
practice the range can be reduced by up to 50 %.
The following factors influence the range of a power
wheelchair:
„ Battery capacity
„ Age of the batteries
„ Ambient temperature
„ Driving conditions (e.g. terrain profile, condition of sur-
face)
„ Charging method
„ Use of power options
„ Body weight of user
6.3.6 Drive-away lock
The control unit of the power wheelchair features an electro-
nic drive-away lock. This function is activated/deactivated
via control panel.
Operation
Ottobock 109
|