Agilent Technologies ALS Handbuch Seite 67

Table 30 Installation kits (continued)
Kit
Recommended for TCD/ECD, MS, and MSD:
GC Supply Gas Installation Kit
Gas Clean Filter kit GC-MS 1/8in.,1/pk
GC, GC/MS, and ALS Site Preparation Guide
Part number Kit contents
19199M Includes 1/8-inch brass nuts and ferrules (20), copper tubing,
1/8-inch brass tees, tubing cutter, 1/8-inch brass caps, 7-mm
nut driver, T-10 Torx driver, T-20 Torx driver, 4 open-end
wrenches, and 1/8-inch ball valve
(For TCD/ECD , also order an additional Gas Clean Filter
CP17974.)
CP17974 Gas Clean filter kit with 1/8-inch fittings (order 2 if using
separate makeup and carrier gas supplies).
6850 Series GC Site Preparation
67