Agilent Technologies - Agilent Technologies ALS Handbuch

GC, GC/MS, and ALS
Site Preparation Guide
2
6850 Series GC Site Preparation
Customer Responsibilities
Basic Tools and Installation Kits
Hydrogen Carrier Gas
Dimensions and Weight
Power Consumption
Heat Dissipation
Exhaust Venting
Environmental Conditions
Gas Selection
Gas and Reagent Purity
Gas Supplies
GC/MS Gas Requirements
Gas Plumbing
Cryogenic Cooling Requirements
Maximum Length of Cables
Site LAN Network
PC Requirements
This section outlines the space and resource requirements for GC, GC/MS, and
automatic liquid sampler (ALS) installation. For a successful and timely
installation of the instrument, the site must meet these requirements before
beginning installation. Necessary supplies (gases, tubing, operating supplies,
consumables, and other usage-dependent items such as columns, vials,
syringes, and solvents) must also be available. Note that performance
verification requires the use of helium carrier gas. For MS systems using
chemical ionization, methane reagent gas or methanol (for internal ionization
ion traps) is also required for performance verification. Refer to the Agilent
Web site at www.agilent.com/chem
GC/MS, and ALS supplies and consumables.
For 7697A Headspace Sampler site prep specifications, refer to the
Prep Guide.
62
63
69
70
73
78
79
80
81
84
85
87
89
98
100
101
102
for the most up-to-date listing of GC,

Agilent Technologies

7697A Site
61