Site Lan Network - Agilent Technologies ALS Handbuch

Site LAN Network

If you intend to connect your system to your site's LAN network, you must
have an additional shielded twisted pair network cable (8121-0940).
Agilent Technologies is not responsible for connecting to or establishing communication
N O T E
with your site LAN network. The representative will test the system's ability to
communicate on a mini-hub or LAN switch only.
The IP addresses assigned to the instrument(s) must be fixed (permanently assigned)
N O T E
addresses. If you intend to connect your system to your site's network, each piece of
equipment must have a unique, fixed (static) IP address assigned to it.
GC, GC/MS, and ALS Site Preparation Guide
6850 Series GC Site Preparation
101