Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Voltage Input:
Models -10, -11, -12, -13; 108 to 132 VAC;
57-63 Hz 30 Watts typical
Models -20, -21, -22, -23; 198 to 264 VAC;
47-57 Hz 30 Watts typical, 0.2A maximum
Environmental
Operating Temp:
10 to 40 degrees C
Operating Humidity:
90% max., non-condensing
Storage Temp:
-40 to 70 degrees C
Storage Humidity:
5 to 95%., non-condensing
Operating Altitude:
4000 feet below sea level to 8000 feet above sea level.
Battery
Type:
Sealed, lead-acid, 12V, 1.9Ah
Operating Time:
2 hrs. with timer interval set to 5 minutes; without SaO2
1 hr. with timer interval set to 5 minutes; with SaO2
Recharge Time:
16 hrs.
Agency Compliancies
This product is designed to comply with:
UL544 Underwriters Laboratory, Medical and Dental Equipment
Canadian Standards Association C-22.2, # 125-M1984
601.1 IEC, Standards for Safety of Medical Equipment
BS5724 BSI
This product méets or exceeds the accuracy requirements specified in:
Standard for Electronic or Automated Sphygmomanometers, AMMI, February 1987
revision Canadian Standard (proposed) for sphygmomanometers:
Medical Device
Regulation Amendment, Schedule IX, 5 Sept., 1987.
Fuses
Replace with IEC 127 type fuse rated T0.25; 250V only.
Replacement:
Disconnect the line cord from unit. Open input module ts-nlacing a
screwdriver into the slot and prying open.
Remove fuse carriers and replace fuses.
Datascope Corp. maintains a policy of continual product improvement and reserves the right to
change materials and specifications without notice.
Revised 07/02/90
|
1-59
Werbung
