Scheppach HMS1070 Original Bedienungsanleitung Seite 38

Chip ejection clogged Too much chip take-off
during thicknesser Blunt blades
operation (without Wood too wet
extraction)
Chip ejection clogged Too much chip take-off
during jointing/planing Feed to fast
(without extraction) Blunt blades
Wood too wet
Chip outlet clogged Extraction too weak
with extraction during
jointing/planing or
thicknessing
Optional accessories
Regular maintenance intervals
Checking the planer blades are in flawless condition
Checking the correct functioning of the safety equipment
Cleaning the machine of dust/chips
Checking the drive belts for tension and condition/wear
Oiling/greasing all movable connecting parts
38 | GB
Reduce chip take-off
Replace the blade
Dry workpiece
Reduce chip take-off
Reduce feed speed
Replace the blade
Dry workpiece
An extraction unit that guarantees an air speed of at
least 20 m/s at the extraction connection, must be
used
HSS planer blade
Two-part set
Article number: 3902203701
EAN: 40 46664 00188 1
Before
start-up
Check X
Replace
Check X
Replace
Clean X
Check
Replace
www.scheppach.com
If Weekly After 6
necessary months
X
X
X
X
X
X