REDEX KRPX1+ Betriebs-, Montage- Und Wartungsanleitung Seite 26

6 RACK & PINION LUBRICATION: OPTIONAL LUBE PINION (PGRP) AND LUBE PINION
SUPPORT (SFRPX)
6.1 Description of the PGRP & SFRP options
The rack and the pinions must be adequately lubricated to maintain the gear
quality and ensure a long lifetime. We recommend using the polyurethane foamed
pinions (PGRP) that meshes with the rack.
The SFRPX is a support plate that holds the lube pinion and brings the lubricant to
the centre of the lube pinion.
The lubricant inlet is a fitting for tube Ø6 x Ø4.
6.2 Recommended Lubricants
We recommend the following lubricants for rack and pinions lubrication:
Trade mark
Herion
If you use the old version of the lube pinion (FGRP – felt pinion), we recommend the following lubricants:
Trade mark
MOBIL
ARAL
BP
Texaco
For other lubricant please consult us. The lowest recommended viscosity is 220 Cst. Lubricants with
lower viscosity may be absorbed by capillary action into the felt pinion; this could empty the reservoir and
create an irregular lubrication cycle.
6.3 Oil flow rates
Determine and set the minimum oil flow rate to feed the lubrication gear using following graph (valid for
Herion F01 F02 lubricants):
This document must not be reproduced nor information therein disclosed without our authorization
KRPX+ User manual
Reference
F01 or F02
Reference
Mobil Glycol 460 HE
Degol GS 460
Energol SG-XP 460
Pinnacle 460
Version 01/2017 - English
Trade mark
SHELL
ICI / TRIBOL
Klübersynth GH6-220
KLÜBER
Structovis EHD 460
Ref.: RX182/010
Reference
Tivela Oil S 460
Tribol 460
Page 24 / 24