Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.4
Oil Draining
We advise to change oil after 10000 hours running.
In order to remove all residual particles in oil, do not hesitate to:
-
Run the unit before draining in order to reduce the viscosity of the old lubricant
"Wash" the unit with fresh oil before refilling.
-
1.
Unscrew the oil input plugs of the KRPX+ to allow air entering the gearbox.
2.
Unscrew the oil output plugs and wait until no more oil flows out from the unit.
NOTE:
Drained oil is a special industrial waste and should be handled according to current laws.
This document must not be reproduced nor information therein disclosed without our authorization
KRPX+ User manual
Ref.: RX182/010
Version 01/2017 - English
Page 10 / 24
Werbung
Inhaltsverzeichnis
