Placing The Machine On Its Side - Global garden products 72 Serie Kundendienst Handbuch

<= ...BACK... <= WORKSHOP MANUAL
72
1998
••••
2.4.
from to
1

PLACING THE MACHINE ON ITS SIDE

1 / 1
page
2.4 PLACING THE MACHINE ON ITS SIDE
WARNING! Two people will be needed for this
work.
When moving the machine onto its side it should
only be gripped at strong parts (steering wheel,
seat, frame, etc.) and NEVER by the plastic parts
of the body.
The fuel tank must be totally emptied before placing
the machine on its side.
Put the machine onto a flat and firm surface,
remove the grass-catcher, engage the parking
brake and raise the cutting deck to its maximum
height.
2 1
The machine must only be laid on its right hand
side, resting the seat (1) and one of the corners of
the grass-catcher (2) as shown. When doing this,
firmly grip the steering wheel and the seat and tip
the machine over until it is resting on the grass-
catcher, taking care not to damage the body's plas-
tic parts.
WARNING! Before carrying out any type of work
make sure that the machine is completely sta-
ble, and avoid operations that could cause it to
fall over.
WARNING! Be just as careful when putting the
machine back on a flat surface; two people are
needed for this operation.
© by GLOBAL GARDEN PRODUCTS 4/2005