Global garden products 72 Serie Kundendienst Handbuch Seite 114

<= ...BACK... <=
5.7.
4
(Peerless MST 205-541 E - Dana 4360-210)
NOTE
When tightening the screw (11) on the left-hand
side, be careful with the stop cable (14), which must
always be taut and straight when the cover is open.
Check that the spacers (15 – 16 – 17 - 18) are cor-
rectly fitted to the shafts, in the sequence given.
Reattach all the connections, and then ...
u Check the brake [see 4.3]
u Refit the engine pulley [see 5.5] to release the
belt.
u Refit the rear wheels [see 6.1].
u Lift the wheels cover [see 2.5].
If the control rod has been replaced or completely
dismantled...
u Adjust the travel and the position of "neutral" for
the lever [see 4.5.A].
Tightening torques
10 Self-tapping screws ....................... 25 ÷ 30 Nm
11 Screws for brackets ....................... 25 ÷ 30 Nm
13 Screws for rear axle fastening ........ 25 ÷ 30 Nm
© by GLOBAL GARDEN PRODUCTS
WORKSHOP MANUAL
- REMOVAL OF THE REAR AXLE
➤ With Peerless transmission:
15
➤ With Dana transmission:
16 17
72
2006
••••
from to
2 / 2
page
18 15
4/2007