Replacement Of The Lever Return Cable ( ➤ Hydrostatic Drive Models) - Global garden products 72 Serie Kundendienst Handbuch

<= ...BACK... <= WORKSHOP MANUAL
72
1998
••••
6.10.
from to
0
REPLACEMENT OF THE LEVER RETURN CABLE
1 / 1
page
6.10 REPLACEMENT OF THE LEVER RETURN
CABLE ( ➤ Hydrostatic drive models)
3 6
u Lift the wheels cover [see 2.5].
u Remove the collector channel [see 5.5]
2
With the pedal released, unhook the barrel (1) from
the lever (2), take it off the lever (3), loosen the nut
(4) of the adjuster, release the spring (5) and remove
the cable (6).
1
Start fitting the spring (5) using the upper hole of the
lever (7) and then completing the operations
described before in reverse order.
4
When fitting is completed,
7
5
u Adjust the cable [see 4.5.D].
u Refit the collector channel [see 5.5].
u Close up the wheels cover [see 2.5].
© by GLOBAL GARDEN PRODUCTS 3/2002