Global garden products 72 Serie Kundendienst Handbuch Seite 109

<= ...BACK... <= WORKSHOP MANUAL
72
2001
••••
5.4.
from to
1
REMOVAL OF THE REAR PLATE
2 / 2
page
To reassemble the plate, start from the two hinges
below and then attach the upper part of the frame
of the wheels cover.
7
Reattach all the electrical connections and make
sure that the microswitch is working.
u Reassemble the wheels cover [see 5.3].
u Check that the channel fits in the opening
[see 4.11].
Tightening torques
6 Hinge screws, rear plate .................... 8 ÷ 10 Nm
7 Screws for attaching rear plate ........ 25 ÷ 30 Nm
© by GLOBAL GARDEN PRODUCTS 4/2005