Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
<= ...BACK... <=
CONTENTS
1. Rules and procedures for Service Centres
This chapter covers all the main aspects of the
relationship between the manufacturer and the
service centres.
A close collaboration between the manufacturer
and the service centres is conclusive for solving
problems in the most effective way as well as
maintaining an image of efficiency and reliability.
Compliance with these brief and simple guide-
lines will facilitate this task and prevent general
misunderstandings and time-wasting for both
the manufacturer and the service centre.
2. General and safety regulations
This chapter covers the main aspects of a servic-
ing procedure and the general rules for guaran-
teeing a successful service which protects the
environment and respects the safety of both the
serviceman and the user of the apparatus.
This chapter deals with the criteria for routine
maintenance.
4. Adjustments and tuning
This chapter deals with the adjustments to be
made to remedy the more frequent performance
failures and are usually resolved by quick checks
and tunings.
GENERAL INDEX
1.1
1
2.1
1
2.2
2
Tools
2.3
1
Lifting
2.4
1
2.5
1
2.6
1
3.1
1
4.1
1
4.2
1
4.3
3
© by GLOBAL GARDEN PRODUCTS
WORKSHOP MANUAL
i.
3
INDEX
5. Removal of external parts and main assem-
blies
For doing more difficult jobs, greater accessibili-
ty may be required. This can be done by taking
the unit concerned off and working at the bench,
or by removing the cover or other external parts.
Whether or not this will be useful is at the discre-
tion of the mechanic's experience.
6. Repairs
This chapter deals with all the more complex
work connected with the replacement or repair
of malfunctioning or worn parts.
The descriptions must follow a logical sequence-
and can include operations not specifically con-
nected to a particular type of repair.
In this case, careful reading of the entire proce-
dure can help you omit all those operations not
connected with the case in hand without, how-
ever, overlooking anything that may be neces-
sary.
7. Electrical system
This chapter deals with the problems and checks
connected with the electrical system.
All work can be done using a tester without hav-
ing to use special equipment.
The electrical diagrams can be useful to you for
understanding how the system functions and to
facilitate the pinpointing of any problems.
8. Technical specifications
This chapter summarises all the main information
regarding the machine.
72
••••
1 / 2
page
4/2007
Werbung
Kapitel
Inhaltsverzeichnis
