Global garden products 72 Serie Kundendienst Handbuch Seite 120

<= ...BACK... <= WORKSHOP MANUAL
72
2003
••••
5.8.
from to
1
REMOVAL OF THE CUTTING DECK
2 / 2
page
After checking that there is nothing in the way, the deck can be removed, first by rotating it slightly to the left
so that all the pins come out of their housings. Then take it out from the right-hand side.
On assembly, first remove the block underneath the rear right wheel.
Check that the pin (11) moves freely [see 2.6 B].
© by GLOBAL GARDEN PRODUCTS 3/2003