Eliwell ICPlus 915 Bedienungsanleitung Seite 27

PAR. DESCRIPTION
LS2 Minimum value assignable to setpoint SP2.
Pb1 maximum value alarm on Regulator 2.
HA2
(See 'Max/Min temperature alarms').
Pb1 minimum value alarm on Regulator 2.
LA2
(See 'Max/Min temperature alarms').
Switch-on delay. The indicated time must elapse between the request for
dn2
activation of the controller 2 relay and switch-on. 0 = Not active.
Delay time after switching off. The indicated time must elapse between
dO2
deactivation of the controller 2 relay and the next switch-on. 0 = Not active.
Delay between switch-ons. The indicated time must elapse between two
di2
consecutive switch-ons of regulator 2. 0 = Not active.
Switch-off delay. The indicated time must elapse between the request for
dE2
deactivation of the controller 2 relay and switch-off. 0 = Not active.
Controller 2 switch-on time in the event of inoperable probe.
On2 • if On2=1 and OF2=0, the controller remains on;
• if On2=1 and OF2>0, the controller operates in Duty Cycle mode.
Controller 2 switch-off time in the event of inoperable probe.
OF2 • if OF2=1 and On2=0, the controller remains off;
• if OF2=1 and On2>0, the controller operates in Duty Cycle mode.
SOFT START CONTROLLER (folder 'SFt')
dSi Value of each subsequent increase (dynamic) of the setpoint. 0 = Disabled.
dSt Time between two subsequent increases (dynamic) of the Setpoint.
Unt Unit of measurement (parameter dSt). 0 = Hours; 1 = Minutes; 2 = Seconds.
MODEL
NTC/PTC
Pt100-Tc
V/I
NTC/PTC
Pt100-Tc
V/I
NTC/PTC
Pt100-Tc
V/I
ALL
ALL
ALL
ALL
ALL
ALL
NTC/PTC
Pt100-Tc
V/I
ALL
ALL
27
RANGE VALUE M.U. LEVEL
-50.0 °C/°F
LdL...HS2 -199.9 °C/°F
-199 num
LA2...150.0 140.0 °C/°F
LA2...1999 1350 °C/°F
LA2...150 150 num
-150.0...HA2 -50.0 °C/°F
-328...HA2 -199.9 °C/°F
-150...HA2 -150 num
0...250 0 secs
0...250 0 min
0...250 0 min
0...250 0 secs
0...250 0 min
0...250 1 min
0.0...25.0 0.0 °C/°F
0.0...25.0 0.0 °C/°F
0...25 0 num
0...250 0 hours
0/1/2 0 num
User/Inst
User/Inst
User/Inst
Inst
Inst
Inst
Inst
Inst
Inst
Inst
Inst
Inst