Eliwell ICPlus 915 Bedienungsanleitung Seite 16

The resources are organized into 2 menus which are accessed as follows:
• Machine Status menu: press and release the
• Programming menu: hold down the
Either do not press any keys for 15 seconds (timeout) or press the
the previous screen.
Password PA1: used to access User parameters. The password is not enabled by default (PA1=0).
To enable it (PA1≠0): press and hold
and until you see the label PS1, press
pressing
Password PA2: used to access Installer parameters. The password is enabled by default (PA2=15).
To modify it (PA2≠15): press and hold
until you see the label PA2, press
through the folders until you find the label diS and press
and until you see the label PS2, press
pressing
The visibility of PA2 is as follows:
1) PA1 ≠ 0 and PA2 ≠ 0: Press and hold
whether to access the User parameters (PA1) or the Installer parameters (PA2).
2) Otherwise: The password PA2 is amongst the User parameters. If enabled, it will be required when accessing the
Installer parameters; to enter it, proceed as instructed for password PA1.
If the value entered is incorrect, the label PA1/PA2 will be displayed again. Repeat the procedure.
ACCESSING AND USING THE MENUs
key for 5 seconds.
PASSWORD
or . If enabled, it will be required in order to access the User parameters.
or .
for longer than 5 seconds to display PA1 and PA2. It will then be possible to decide
key.
key once, to confirm the last value displayed and return to
for longer than 5 seconds, scroll through the parameters using
to display the value, modify it using
for longer than 5 seconds, scroll through the parameters using
, set the value to '15' using
to enter. Scroll through the parameters using
to display the value, modify it using
16
and , then save it by
and , then confirm using
and , then save it by
and
. Scroll