Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
•
Disconnect all power from all equipment including connected devices, prior to removing any covers or doors, or installing or
removing any accessories, hardware, cables, or wires.
•
Always use a properly rated voltage sensing device to confirm the power is off where and when indicated.
•
Replace and secure all covers, accessories, hardware, cables and wires.
•
Check the earthing connections on all earthed devices.
•
Use only the specified voltage when operating this device and any associated products.
•
Do not connect the equipment directly to the line voltage, except where indicated otherwise.
•
For the 12 Vac/dc and 12-24 Vac/12-36 Vdc version, use insulated SELV (Safety Extra Low Voltage) power supply sources.
Failure to follow these instructions will result in death or serious injury.
LOOSE WIRING CAUSES ELECTRIC SHOCK
Tighten connections in conformance with the torque specifications.
Failure to follow these instructions will result in death or serious injury.
ELECTRICAL CONNECTIONS
DANGER
DANGER
6
Werbung
Inhaltsverzeichnis
