Separate Lcd Monitor; Switching On And Off; Driving Function - Otto Bock B600 Bedienungsanleitung

Operation

6.3.2 Separate LCD Monitor

A separate LCD monitor with infrared and Bluetooth (op-
tional) is available to operate special controls and for envi-
ronment control functions. Please see Section 7.8.1 for more
information.

6.3.3 Switching On and Off

WARNING
Risk of death due to lack of brake functionality. The
brake release lever must be locked when using the power
wheelchair. The automatic brake must be operational and
functional.
CAUTION
Risk of accidents due to incorrect tyre pressure. The
power wheelchair must be visually inspected prior to each
use to ensure that the tread depth is sufficient and that the
tyres are inflated to the correct pressure. Incorrect tyre
pressure reduces the life of the tyres and impairs the driv-
ing characteristics.
Page 124
Downloaded from www.Manualslib.com manuals search engine
The control unit of the power wheelchair is switched on and
off by pressing the on/off button (see Figure 16, item 5).
If the control is not used for a certain time, which is adjust-
able, the wheelchair is switched off automatically. It is also
possible to switch off the power wheelchair with the on/off
button while driving. In this case, the wheelchair brakes im-
mediately until it stops.
Every time you switch on the control unit, it will
INFORMATION
return to the previously selected speed level (factory setting;
can be adapted by the specialist dealer).

6.3.4 Driving Function

CAUTION
Risk of injury due to uncontrolled operation of the
power wheelchair. Switch off the control unit on the power
wheelchair whenever you do not need it. This will prevent
you from unintentionally activating the joystick.
02/2009 B600