Language, Menu - ESBE 90C-2 series Handbuch

LANGUAGE, MENU 12

Selection of the menu language.
12.1 Deutsch
12.2 English
12.3 Français
▲ ▼
OK
Menu 12.1 Deutsch
Menu 12.2 English
Menu 12.3 Français
Menu 12.4 Svenska
Menu 12.5 Italiano
Menu 12.6 Türkçe
Menu 12.7 Pycckий
Menu 12.8 Español
Menu 12.9 Norsk
Menu 12.10 Polski
Menu 12.11 Suomi
Menu 12.12 Eesti keel
Menu 12.13 Română
Menu 12.14 Lietuvių
Menu 12.15 Čeština
Menu 12.16 Ελληνικά
Menu 12.17 Dansk
20
ROOM SENSOR
FOR EASY REMOTE ADJUSTER OF SENSOR FUNCTIONS.
Automatic mode is selected when switch is put on:
Night mode is selected when switch is put on:
Day mode is selected when switch is put on:
Adjust settings in menu 9.6.1 "influence of the room temp on the target flow"
FOR "VACATION" PROGRAM PUT KNOB ON:
Possible only when frostprotection is activated in Menu 8.1
Heating circuit will run on min. flow temp when outdoor temp is lower than 0ºC or when
indoor temp is lower than +10ºC . Min flow temp settings, see menu 8.2
Heating circuit will be shut off when outdoor temp is higher than 0ºC and indoor temp is
higher than +10ºC
Turning the knob will influence room temperature
reference value.
INSTALLATION
Temperatur sensor
Remote control +/- blue
Sensor yellow
Sensor erth white