Siemens SINUMERIK 828D Inbetriebnahmehandbuch Seite 265

<caption>selected machine data</caption>
<DATA_ACCESS type="true" />
<!-- switch on the direct access to the NC variables -->
<control name = "edit1" xpos = "322" ypos = "34" refvar="$MN_AXCONF_MA-
CHAX_NAME_TAB[0]" />
<control name = "edit2" xpos = "322" ypos = "54" refvar="$MN_AXCONF_MA-
CHAX_NAME_TAB[1]" />
<control name = "edit3" xpos = "322" ypos = "74" refvar="$MN_AXCONF_MA-
CHAX_NAME_TAB[2]" />
<control name = "edit4" xpos = "322" ypos = "94" refvar="$MN_AXCONF_MA-
CHAX_NAME_TAB[3]" />
<control name = "edit5" xpos = "322" ypos = "114" refvar="$MA_IS_ROT_AX[AX1]"
hotlink="true" />
<control name = "edit6" xpos = "322" ypos = "134" refvar="$MA_IS_ROT_AX[AX2]"
hotlink="true" />
<control name = "edit7" xpos = "322" ypos = "154" refvar="$MA_IS_ROT_AX[AX3]"
hotlink="true" />
<!-- using the control type combo box to display the rotation axis value -->
<control name = "edit5" xpos = "322" ypos = "194" refvar="$MA_IS_ROT_AX[AX1]"
fieldtype = "combobox" hotlink="true" >
<item value= "0" >no</item>
<item value= "1" >yes</item>
</control>
<control name = "edit6" xpos = "322" ypos = "214" refvar="$MA_IS_ROT_AX[AX2]"
fieldtype = "combobox" hotlink="true" >
<item value= "0" >no</item>
<item value= "1" >yes</item>
</control>
<control name = "edit7" xpos = "322" ypos = "234" refvar="$MA_IS_ROT_AX[AX3]"
fieldtype = "combobox" hotlink="true" >
<item value= "0" >no</item>
<item value= "1" >yes</item>
</control>
</init>
<paint>
Inbetriebnahme CNC
Inbetriebnahmehandbuch, 10/2015, 6FC5397-3DP40-5AA3
Easy Extend
8.6 Beispiele
251