Scheppach HP2500S Originalbetriebsanleitung Seite 36

Residual risks
The machine has been built according to the state-of-
the-art and the recognised technical safety require-
ments. However, individual residual risks can arise
during operation.
• Furthermore, despite all precautions having been
met, some non-obvious residual risks may still re-
main.
• Residual risks can be minimised if the "Safety In-
structions" and the "Intended Use" together with the
operating instructions as a whole are observed.
• Avoid accidental start-ups of the machine.
• Use the tool that is recommended in this operating
manual. This is how to ensure that your machine
provides optimum performance.
• Keep your hands away from the working area when
the machine is in operation.
6. Technical data
Engine / drive
4-stroke for unleaded petrol
Displacement
Engine output
Fuel content
Engine oil capacity
max.
Max. permissible
inclination for the
engine
CO output 811.46 g/kWh
2
Eccentric vibration
unit oil capacity
approx. 630 x
Plate size (L x W)
Centrifugal force
Feed
Vibration frequency
Compaction depth
Weight
Subject to technical changes!
36 | GB
HP2500S HP3000S
1-cylinder
196 cm³ 270 cm³
4.1 kW 6 kW
3.6 l 6 l
0.6 l 0.95 l
25° 25°
837.19 g/kWh
0.35 l
approx.730 x
400 mm 450 mm
28000 N 30500 N
15 m/min 21 m/min
4300 vpm 4020 vpm
40 cm 50 cm
approx. 125 approx. 158
kg
www.scheppach.com
Noise and vibration
The noise levels have been determined in accordance
with EN ISO 3744. Total vibration emission values (vec-
tor sum of three directions) determined per EN 500-1.
Noise can have serious effects on your health. If the
machine noise exceeds 85 dB, please wear suitable
hearing protection.
Noise data:
Sound pressure level L
Uncertainty K
pA
Sound power level L
Uncertainty K
WA
Vibration parameters:
Vibration a
h
(L / R)
Uncertainty K
The specified sound levels have been measured in ac-
cordance with a standardised test procedure and can
be used to compare different tools with one another.
In addition, these values are suitable for estimating
the stresses for the user resulting from the noise in
advance.
Warning! Depending on how you use the tool, the ac-
tual values may differ from the those given. Implement
measures to protect against noise nuisance.
In doing so, take into account the complete working
process, including the times when the tool is working
without load or switched off.
Suitable measures include regular maintenance and
care of the tool and the insertion tools, regular breaks
as well as proper planning of the working process.
7. Unpacking
• Open the packaging and carefully remove the prod-
uct.
• Remove the packaging material, as well as the pack-
aging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
kg
• Check the product and accessory parts for transport
damage. In the event of complaints the carrier must
be informed immediately. Later claims will not be
recognised.
HP2500S HP3000S
82,30 dB 84,40 dB
pA
1,58 dB 1,61 dB
102,30 dB 104,48 dB
WA
1,58 dB 1,61 dB
HP2500S HP3000S
16,2/17,5 m/s² 14,9/15,9 m/s²
1,5 m/s² 1,5 m/s²